UNI-T UTG1000 Series User Manual

78 UTG1000A Series
Appendix A Factory Reset State
Parameters Factory Defaults
Channel Parameters
Current Carrier Wave Sine Wave
Output Outload 50Ω
Synchronous Output Channel
Channel Output Close
Channel Output Invert Close
Amplitude Limit Close
Amplitude Upper Limit +5V
Amplitude Lower Limit -5V
Basic Wave
Frequency 1kHz
Ampltide 100mVpp
DC Offset 0mV
Initial Phase 0°
Duty Cyle of Square Wave 50%
Symmetryof Ramp Wave 100%
Duty Cycle of Pulse Wave 50%
Lead Edge of Pulse Wave 24ns
Tail Edge of Pulse Wave 24ns
Arbitrary Wave
Bulit-in Arbitrary Wave AbsSine
AM Modulation
Modulation Source Internal
Modulation Shape Sine Wave
Modulation Frequency 100Hz
Modulation Depth 100%
FM Modulation
Modulation Source Internal
Modulation Shape Sine Wave

UNI-T UTG1000 Series Specifications

General

Brand	UNI-T
Model	UTG1000 Series
Category	Portable Generator
Language	English