UNI-T UTG1000 Series User Manual

UTG1000A Series 37
Carrier Wave Waveform Selection
PM carrier waveform can be: Sine wave, square wave, ramp wave or arbitrary wave (except DC), and the default is
sine wave. Press Carrier Wave Parametersoftkey to select carrier waveform.
Carrier Wave Frequency Setting
Settable carrier wave frequency range is different of different carrier waveform. Default frequency of all carrier
wave is 1kHz. The frequency setting range of each carrier wave can be seen in the following table:
Carrier Wave
Frequency
UTG1020A UTG1010A UTG1005A
Minimum
Value
Maximum
Value
Minimum
Value
Maximum
Value
Minimum
Value
Maximum
Value
Sine Wave 1μHz 10MHz 1μHz 10MHz 1μHz 5MHz
Square wave 1μHz 5MHz 1μHz 5MHz 1μHz 5MHz
Ramp Wave 1μHz 400kHz 1μHz 400kHz 1μHz 400KHz

UNI-T UTG1000 Series Specifications

General

Brand	UNI-T
Model	UTG1000 Series
Category	Portable Generator
Language	English