Administration
A31003-C1000-M102-5-76A9, 09/2017
104 OpenScape Desk Phone CP200/CP205/CP400/CP600 HFA, Administration Manual
administration.fm
Transferring Phone Software, Application, and Media Files
3.9.5 LDAP Template
The LDAP template is an ASCII text file that uses an allocation list to assign directory server
attributes to input and output fields on an LDAP client. The LDAP template must be modified
correctly for successful communication between the directory server and the LDAP client.
3.9.5.1 FTP/HTTPS Access Data
If the default FTP/HTTPS access settings (see Section 3.9.2, “Common FTP/HTTPS Settings
(Defaults)”) are to be used, Use default must be set to "Yes", and only the Filename must be
specified.
Data required (in any case)
• Use default: Specifies whether the default FTP/HTTPS access settings shall be used.
Value range: "Yes", "No"
Default: "No"
• Filename: Specifies the file name of the phone software.
• After submit: Specifies actions after submit button is pressed.
Value range: "do nothing", "start download".
Default: "do nothing".
Data required (if not derived from Defaults)
• Download method: Selects the protocol to be used.
Value range: "FTP", "HTTPS"
Default: "FTP"
• Server address: IP address or hostname of the FTP/HTTPS server in use.
• Server port: Port number of the FTP/HTTPS server in use.
Default: 21
• Account: Account at the server (if applicable).
• Username: User name for accessing the server.
• Password: Password corresponding to the user name.
• FTP path: Path of the directory containing the files.
>
LDAP template is available only on OpenScape Desk Phone CP400/600 phones.
>
The OpenScape Desk Phone CP phones support LDAPv3.
To Next Page
Loading...
Need help?
General