Enhanced phone functions 41
Speaker call in a group
You can also establish a normal connection within a group or team (with team
call = speed dial numbers 0-9 or 00-99 for team members) via a speaker call.
The speaker call is then initiated by a group telephone.
Speaker call to a variable destination
^ Lift the handset.
or
n Press the key and enter speakerphone mode.
j Enter the system code for "COM group speaker call" (contact the administrator
if necessary).
j Enter the speed dial number for the corresponding group member.
A connection is immediately established to this destination station’s loudspeaker
if
• the station is not busy
• the handset has not been lifted
• "Do not disturb" is not activated
^ The called party accepts the DSS call by lifting the handset.
n When the called party presses the speaker key, the connection is lost.
Two-way intercom to a variable destination
When using the two-way intercom in a group, the loudspeaker and the micro-
phone of the destination phone are automatically switched on.
^ Lift the handset.
or
n Press the key and enter speakerphone mode.
j Enter the system code for "Speaker call-two-way" (contact the administrator if
necessary).
j Enter the speed dial number for the corresponding group member.
np The loudspeaker and microphone of the destination phone are automatically
switched on.
The "COM group speaker call" function is line-independent – all phones
can call each other via a speaker call.
To Next Page
Loading...
Need help?
General