Basic functions 23
Dialing with the headset connected
Prerequisite: The headset is connected.
j internal: Enter the station number.
External calls: Enter the external code and the station number.
o The headset key lights up.
The connection is established as soon as your input is complete.
Dialing with DDS keys
Prerequisite: You have saved a number on a DDS key Page 56.
S Press the key with a saved number.
If the number is saved on the second layer, press the shift key first.
^ Lift the handset.
or
n Press the key shown.
Redialing a number
The last ten external telephone numbers dialed are stored automatically.
You can redial them simply by pressing a key.
Displaying and dialing saved station numbers
, Press the "Redial" key to dial the last number dialed.
Press the key twice to dial the next to the last number dialed.
Press the key three times to dial the third-to-the-last number dialed.
or
Keep confirming until the phone number you want appears.
Select and confirm the option shown.
End call
n Press the lit key.
or
\ Replace the handset.
You can press the DDS key during a call and automatically initiate a call-
back Page 25.
If this feature is configured (contact your service personnel), account
codes entered are also saved
Page 58.
To Next Page
Loading...
Need help?
General