Unify OpenStage 30 T User Manual

46 Enhanced phone functions
Holding external calls
If you have programmed a hold key on your phone  Page 52, you can put ex-
ternal calls on hold. 
Then all other stations can accept the call on the assigned trunk.
S Press the "Hold" key.
The message of the relevant trunk appears (e.g. 801) and note the trunk num-
ber. 
If available, the LED of the assigned trunk key flashes slowly.
if nec.
\ or s Replace the handset or press the key shown.
Depending on the configuration, this may be necessary so other members can
also pick up the call on hold.
Accepting call on hold
Prerequisite: One or more calls are on hold. The phone is idle.
N Press the key shown.
Select and confirm the option shown.
or
S If the "Retrieve" key is available  Page 52, press it.
j Enter the noted trunk number.
or
T If there is a "Line:" key available for the relevant trunk, it flashes slowly. Press
the key shown.
Held on line: 801
Retrieve line

Unify OpenStage 30 T Specifications

General

Brand	Unify
Model	OpenStage 30 T
Category	Telephone
Language	English