Unitech KP3800 User Manual

46 Keyboard Manual
Code 128 / MSI / Code 93 / Code 11 / Codabar / Label Code, continued
0
1
2
3
4
5
6
7
8
9
Exit
0/1 - Disable / Enable
2/3 - Checksum send / No send
Label Code IV and V:
G6
To define minimum or maximum acceptable
bar code data length, after scanning the
parameter code (G1 through G5) scan the
“MM” or “NN” to the right, scan the number(s)
to the left, and then scan the “MM” or “NN”
again. Then scan “Exit” as usual.
Define Minimum and Maximum Length
MM
Min. Length
NN
Max. Length
0/1 - Disable / Enable
2/3 - Start & Stop Send / No Send
4 - Check Digit Calculate & Send
5 - Check Digit Calculate but not Send
6 - Check Digit not Calculate
7/8 - CLSI Format On / Off
3 ~ 48 - Min Length 3 / Max Length 48
Codabar:
(See below for Min./Max. Length procedure)
G5

Unitech KP3800 Specifications

General

Brand	Unitech
Model	KP3800
Category	Keyboard
Language	English