S
CANNER
O
PERATION
Beeper Options
³118407
* Ignore BEL Command
³116913
Enable Light Pen Toggle During Beep - The
scanner beeps and toggles the light pen data line
on a successful decode. This drives a good read
indicator.
³116903
* Disable Light Pen Toggle During Beep
Data Transmission Delays
Use these codes to select the amount of delay between sending data characters
from the scanner to the host. This helps prevent the scanner from overflowing
host-input buffers.
³818810
* 1 msec Intercharacter Delay
³8188100
10 msec Intercharacter Delay
³8188250
25 msec Intercharacter Delay
³918800
~
ariable msec Intercharacter Delay - Scan this
bar code and a sequence of code bytes to set the
delay between characters sent to the host system
(range from 1 to 255 msecs.).
³818800
No Intercharacter Delay
³919300
~ Variable Inter-Record Delay
³119317
Turn Off Laser During Inter-Record Delay
³119307
* Leave Laser On During Inter-Record Delay
7
To Next Page
Loading...
Need help?
General
