Unitech MS337 User Manual

B AR C ODE C ONFIGURATION M ETHODS
Single-Code Method
Most features can be enabled or disabled using the Single-Code Method.
1. Power up the scanner.
2. Scan the bar code for the desired feature.
Observe a multi-toned, “save setting” beep that indicates the configuration has
been saved to NOVRAM.
Multi-Code Method
All features can be enabled or disabled using the Multi-Code Method.
A feature marked with a tilde ( ~ ) requires the Multi-Code Method.
1. Power up the scanner.
2. Scan the enter/exit configuration mode bar code (3 beeps).
3. Scan the bar code for the desired feature (1 beep).
Multiple features can be enabled/disabled before
scanning the enter/exit configuration mode bar code.
4. Scan the enter/exit configuration mode bar code (3 beeps) and
save the new configuration.
To abort a configuration change, power off the scanner before
scanning the enter/exit code.
Enter/Exit Configuration Mode
³999999
2

Unitech MS337 Specifications

General

Brand	Unitech
Model	MS337
Category	Scanner
Language	English