9. ROTOR.Klean – Automatic Washing System
Installation
- Water connection:
- It is necessary to place a cut-off
valve between the water system
and the appliance.
- As required by current laws, the
appliance is equipped with 2
meters of pipe, the respective pipe
fitting (3/4”) with non-return valve
and mechanical filter. It’s also
provided a 2 bar pressure reducing
inlet.
- Before connecting the water pipe
to the appliance please let some
water flow to clear the pipe of any
obstructions.
- The water used in the appliance
must have a pressure value
between 1,5 and 2 bar and a
maximum temperature of 30°C. It’s
also provided a 2 bar pressure
reducing inlet.
Washing connections
32
2
1
Water inlet
DETERGENT
WASHING
Water
outlet
RINSE