Utax P-4035 MFP Service Manual

2NM/2NX/2NY/2NZ/2P0/2P6-7
2-2-1
2-2 Operati on of the PWBs
2-2-1 Upgrading the firmware
Follow the procedure to upgrade the firmware below.
Preparation
Extract the file that has the download firmware and store them in a USB memory.
NOTE: To improve Firmware Upgrade speed, a separate SKIP file can be added to the USB memory
with the Firmware Upgrade package. The Skip file will allow ONLY the Firmware that has been
Upgraded to a New Version to load, skipping duplicate Firmware Levels.
Procedure
1. Turn ON the main power switch and
confirm if the screen shows “Ready to
print” then, turn OFF the main power
switch.
2. Insert USB memory that has the firm-
ware in the USB memory slot.
3. Turn ON the power switch.
4. About 10 seconds later, “FW-Update”
will be displayed (this shows that down-
loading is ready to start).
5. Confirm that upgrading is completed.
6. Confirm that the version of the firmware is
correctly displayed.
7. Unplug the power cord and then
remove the USB memory.
8. Connect the power cord and confirm
that the screen shows “Ready to print”,
and then turn the main power switch
OFF.
Figure 2-2-1
Caution: Never turn off the power switch or remove
the USB memory during upgrading.
Safe-UPDATE
If the device is accidentally switched off or the USB memory is disconnected and upgrading is incomplete,
perform the following.
If the power is accidentally switched off, turn the power on without removing the USB memory and perform the
above steps 3 through 8.
If the USB memory is disconnected, reinsert it, then turn the power on and perform the above steps 3 through
8.
In any case, complete the steps to the end.
* Controller Firmware
* Operation Panel Firmware *1
* Engine Firmware
* Option Language Data
* Dictionary Data *1
* Browser Data *1
* FAX Firmware
* PF (Paper Feeder) Firmware
*1: HyPAS model only
USB memory
USB memory
slot

Utax P-4035 MFP Specifications

General

Duplex printing	Yes
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Duplex print speed (black, normal quality, A4/US Letter)	20 ppm
Copier resize	25 - 400 %
Maximum number of copies	999 copies
Copy speed (black, normal quality, A4)	40 cpm
Scan to	E-mail, File, Image, USB
Grayscale levels	256
Image formats supported	JPG, TIF
Document formats supported	PDF, XPS
Faxing	Mono faxing
Fax memory	8 MB
Modem speed	33.6 Kbit/s
Fax coding methods	JBIG, MH, MMR (Fax coding method), MR
Fax resolution (black)	200 x 100 DPI
Fax transmission speed	3 sec/page
Digital sender	-
Printing colors	Black
Maximum duty cycle	- pages per month
Total input capacity	500 sheets
Total output capacity	250 sheets
Duplex media weight	60 - 120 g/m²
Paper tray media types	Envelopes
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Product color	Black, Grey
Market positioning	Business
Wi-Fi	No
Cabling technology	10/100/1000Base-T(X)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Mobile printing technologies	Apple AirPrint
Standard interfaces	Ethernet, USB 2.0
Memory slots	1
Internal memory	512 MB
Compatible memory cards	SD
Sound power level (standby)	53 dB
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (standby)	54.7 W
Power consumption (average operating)	680 W

Weight and Dimensions

Depth	455 mm
Width	475 mm
Height	575 mm
Weight	21500 g