Utax P-5031DN User Manual

4-35
Operation Panel
Oufuku Hagaki (#3)
Oficio II
216x340mm
16K
Statement
Folio
Youkei 2 (#1)
Youkei 4 (#1)
#1 Only when optional paper feeder PF-320 is installed.
#2 Cassette 1 for the P-5031DN, P-5531DN and P-6031DN.
#3 Cassette 1 except for the P-4531DN.
5 Press  or  to select the desired paper size.
6 Press [OK]. The paper size for the cassette is set and the Cassette
# Set. menu screen reappears.
If you selected Custom in step 4, use the procedure below to specify
the paper length and width.
Custom PaperSize (Setting a Custom Paper Size)
In the procedure below, select the units to be used for entering the custom paper size and then enter the paper width and
length. As shown in the figure, enter the Y and X values for the paper size, using the selected units.
1 In the Cassette # Set. menu, press  or  to select Custom
PaperSize.
# shows the number of the cassette installed in the printer (1 to 5).
Note When Custom is selected, it is possible to enter the
paper size. For details, refer to Custom PaperSize (Setting a
Custom Paper Size) on page 4-35.
X Dimension
Y Dimension
Cassette:
105 to 216 mm (4.13 to 8.5 inches)
Paper Feeder PF-320:
92 to 216 mm (3.62 to 8.5 inches)
Cassette:
148 to 356 mm (5.83 to 14.02 inches)
Paper Feeder PF-320:
162 to 356 mm (6.38 to 14.02 inches)
Cassette 1 Set.:
Exit
Other Paper Size
02
01
Media Type
Custom PaperSize
03

Utax P-5031DN Specifications

General

Brand	Utax
Model	P-5031DN
Category	Printer
Language	English