1 Press the Copy key when the Copy key/indicator
is off.
NOTE: If the Message Display is turned off, press the
Energy Saver key and wait for the machine to warm
up.
2 Place the originals on the platen or in the
document processor.
NOTE: For loading instructions, refer to Loading
Originals on page 2-65.
3 The paper source for copying is the location
displayed on the panel.
When you need to change the paper source, use
the Paper Selection menu. If [Auto] is selected, the
most suitable paper source is automatically
selected.
For specifying the paper source, refer to Paper
Selection on page 4-4.
To Next Page
Loading...
Need help?
General
