Utax P-C2660 MFP User Manual

Default Setting (System Menu)
8-72
4 Press the OK key. AutoPaperSelect. appears.
5 Press the  or  key to select [Off] or [On].
6 Press the OK key. Completed. is displayed and the
screen returns to the Copy menu.
DP Read Action
You can set whether priority is given to speed or image quality when scanning an original on the document
processor.
The table below shows the available settings. The default setting is Speed Priority.
Use the procedure below to specify the DP Read Action.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [Copy].
2 Press the OK key. The Copy menu appears.
3 Press the  or  key to select [DP Read Action].
4 Press the OK key. DP Read Action appears.
Auto % Priority: a b
*********************
2 On
1 *Off
Item Detail
Speed Priority Priority is given to speed when scanning
Quality Priority Priority is given to image quality when scanning
Sys. Menu/Count.: a b
*********************
8 Printer
9 Send
[ Exit ]
7 Copy
Copy: a b
*********************
2 AutoPaperSelect.
3 Auto % Priority
[ Exit ]
1 Paper Selection
DP Read Action: a b
*********************
2 Quality Priority
1 *Speed Priority

Utax P-C2660 MFP Specifications

General

Brand	Utax
Model	P-C2660 MFP
Category	All in One Printer
Language	English