Default Setting (System Menu)
8-127
8
Use the procedure below to set the Color Calibration.
1 In the Sys. Menu/Count. menu, press the or
key to select [Adjust/Maint.].
2 Press the OK key. The Adjust/Maint. menu
appears.
3 Press the or key to select [ColorCalibration].
4 Press the OK key. ColorCalibration appears.
5 Press [Yes] (the Left Select key) to execute Color
Calibration.
6 Completed. is displayed and the screen returns to
the Adjust/Maint. menu.
Color Regist.
When first installing the machine or moving it to a new location, color drift during printing may occur. Use this
function to correct the color position of each of cyan, magenta and yellow to resolve color drift. Normal
registration and detailed settings are available for Color Registration. Color drift can be largely corrected
through normal registration. However, if it is not resolved or to perform more detailed settings, use the detailed
settings.
NOTE: To perform color registration, verify that either Letter or A4 paper is loaded into a cassette.
IMPORTANT: Before performing color registration, be sure to perform color calibration (see page 8-126). If
color drift remains, perform color registration. By performing color registration without performing color
calibration, the color drift will be resolved once, however, it may cause the serious color drift later.
To Next Page
Loading...
Need help?
General
