Introduction Safety Warnings
4
Safety Warnings
WARNING
This system operates near highly combustible fuel storage tanks.
Fire or explosion resulting in serious injury or death could result if the
equipment is improperly installed or modified or is used in any way other than
its intended use. Serious contamination of the environment may also occur.
To ensure proper installation, operation, and continued safe use of this product:
1. Read and follow all instructions in this manual, including all safety
warnings.
2. Have equipment installed by a contractor trained in its proper installation
and in compliance with all applicable codes including: the National
Electrical Code; federal, state, and local codes; and other applicable safety
codes.
3. To prevent ignition of flammable or combustible atmospheres, disconnect
power before servicing.
4. Operate this equipment in accordance with the instructions in this manual.
5. Do not modify or use service parts other than those provided by Veeder-
Root. Substitution of components may impair intrinsic safety.
WARNING
This system operates on low dc voltage/current inputs.
To avoid equipment damage:
1. Disconnect the EMR power wire prior to using vehicle battery charging
equipment.
2. Disconnect the EMR power wire prior to jump starting the vehicle.
3. Disconnect the EMR power wire prior to replacing the vehicle's battery.
4. Always disconnect the IB box from truck power before welding on the
truck.
To Next Page
Loading...
Need help?
General
