10
3 Product description
VEGADIS 82 • 4 … 20 mA/HART
45300-EN-240516
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or con-
cealed defects must be appropriately dealt with.
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
•
Not in the open
•
Dry and dust free
•
Not exposed to corrosive media
•
Protected against solar radiation
•
Avoiding mechanical shock and vibration
•
Storage and transport temperature see chapter "Supplement -
Technical data - Ambient conditions"
•
Relative moisture 20 … 85 %
3.4 Accessories
The display and adjustment module PLICSCOM is used for measured
value indication, adjustment and diagnosis.
The interface adapter VEGACONNECT enables the connection of
communication-capable instruments to the USB interface of a PC.
The sun protection protects the device from direct sunlight and thus
prevents overheating of the electronics. It also improves the readabil-
ity of the display when exposed to sunlight. The sun protection can be
used for wall and pipe mounting.
Transport inspection
Storage
Storage and transport
temperature
PLICSCOM
VEGACONNECT
Sun shade