Velux KMX 100 User Manual

72 VELUX VELUX 73
Using additional activation controls
Products and remote control settings can be copied from
one remote control to another. Copying depends on the
type of activation control and on whether the activation
control to be copied to is new or already in operation.
• Copying to a new remote control
How to copy the contents from one remote control to
another remote control not yet in operation.
• Copying to a remote control in operation
How to copy the contents from one remote control to
another remote control where the two remote controls
have not registered the same products.
• Copying products from other types of activation
controls
How to copy the products from another type of activa-
tion control to the remote control.
• Copying products to other types of activation
controls
How to copy the products in the remote control to
another type of activation control.
The following examples presuppose the use of VELUX
two-way remote controls unless otherwise mentioned. For
other io-homecontrol
®
activation controls, please refer to
the instructions provided with the product in question.
Note: When copying between two VELUX two-way
remote controls, all registered products and personal
settings are copied, apart from personal programs that
cannot be copied. When copying from VELUX two-way
remote controls to other types of activation controls, only
the registered products will be copied, not the remaining
settings such as personal names, Rooms, Groups etc.

Velux KMX 100 Specifications

General

Brand	Velux
Model	KMX 100
Category	Remote Control
Language	English