80 VELUX VELUX 81
Menu
Locate
P1
P2
A B
1
2
Enter Back
Enter Back
Enter
Back
B
Copying products to other types of activation controls
You can copy one or more products registered in the
remote control to another type of io-homecontrol
®
activa-
tion control. This other type of activation control can thus
operate both its own and the copied products.
The example shows how to copy a roller blind from a
VELUX two-way remote control A to a VELUX one-way
remote control B so that the latter can operate both the
roller blind and the roller blinds it could already operate.
Note: A VELUX one-way remote control can operate
products of the same type only, in this case roller blinds.
Step 1: Prepare remote control A for copying
1
Press "Menu".
2
Select the submenu:
3
Press to highlight "Configure".
Press "Enter" to confirm your choice.
4
Press "Enter" to continue selecting the product to be
copied to another type of activation control (B).
5
Locate the product. The individual products can be identi-
fied by pressing for a short period of time. This will
activate the product briefly.
6
The display shows the relevant product.
Press
"Enter" to confirm your choice.
7
The display shows that the product is ready to be config-
ured in activation control B.
Step 2: Register the product in activation control B
8
Press the RESET button on the back briefly (for maximum
5 seconds) to register the new product. The product
selected can now be operated with activation control B.
To Next Page
Loading...
Need help?
General
