Velux KMX 100 User Manual

8 VELUX VELUX 9
P1
P2
P1
Menu


Locate
P1
P2
P2
Menu


Locate


Remote control functions
The display indicates which product is being oper-
ated, which menu function is being used etc. The
top line of the display states the chosen area. Prod-
ucts are as default shown under the area House.
The bottom line of the display states the function
of the two selection keys.
Note: The display shows the last product operated.
Selection, navigation and program keys
Keys for operating the product chosen
Note: If the window is equipped with a roller shut-
ter or an awning blind, the display text Menu in the
bottom left hand corner will be replaced by the text
Hint. When pressing the selection key underneath,
energy savings by automatic control of sunscreen-
ing is oered, see section Energy Balance.
Selection keys
- for activating the menu and confirming the chosen
menu function.
- for locating the Room, Group, Zone or product to be
operated.
The current function of the individual selection key is
stated directly above in the display.
Navigation keys
- for scrolling up and down in the product or menu list.
- for scrolling through the time intervals to set the
remote control to close the window automatically.
Shortcut keys P1/P2
- for activating a program by pressing just one key.
Keys for operating a product or a Group of products
OPEN/UP/ON or CLOSE/DOWN/OFF
Short key press: Product will travel to maximum top or
bottom position.
Long key press: Product will travel to pre-set position.
See sections Choosing setting positions and Choosing
luminous intensity.
Stop and status key
STOP/STATUS
Short key press: The product in operation stops or the
status is shown.
Long key press: All products in operation stop.

Velux KMX 100 Specifications

General

Brand	Velux
Model	KMX 100
Category	Remote Control
Language	English