56 VELUX VELUX 57
Menu
Locate
Continue Back
P1
P2
Back
Enter
P1
P2
Enter Back
P1
P2
Enter Back
P1
P2
Back
Select
P1
P2
EditContinue
Enter Back
P1
P2
P1
P2
Customised setting
Used for automatic control of selected roller shutters and
awning blinds. In addition, the location of the windows
in the building (north/south/east/west) is taken into ac-
count.
If the program has been enabled via Standard setting
already, you must first disable this setting via the function
Enable and then follow the example below.
1
Press "Menu".
2
Scroll through the menus:
3
Press "Continue".
4
Press to highlight "Enable".
Press "Enter" to confirm your choice.
5
Press to highlight "Customised".
Press "Enter" to confirm your choice.
6
Press to highlight the city that is geographically clos-
est to the location of the building.
Press "Enter" to confirm your choice.
7
The display shows that the chosen city has been saved.
8
The display shows a list of all roller shutters and awning
blinds registered. The relevant product can be identi-
fied by pressing
for a short period of time. This will
activate the product briefly.
Press
to highlight the product to be controlled
automatically.
Press "Select".
9
Press to highlight the point of the compass for the
window on which the roller shutter or awning blind in
question has been installed.
Press "Enter" to confirm your choice.
10
The display shows a list of the products that will be
controlled automatically.
• Press
"Edit" to return to item 8 in case of additions
or changes.
• Press "Continue" when the list of the products to be
controlled via the program is complete.
Energy Balance
To Next Page
Loading...
Need help?
General
