SAFETY
Safety - 16
KT4200 Safety Procedures
• Weight transfer springs may contain stored energy. Always disengage the weight transfer system before
performing maintenance or repairs on the weight transfer system, the front hitch, or the lift hydraulics.
• Power unit hydraulic system may contain stored energy. Before performing maintenance or repairs on
the attachment hydraulic system, remove attachments, engage parking brake, disengage weight
transfer system, shut off engine, and remove ignition key.
The engine exhaust from this product contains
chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm.
CALIFORNIA PROPOSITION 65
Diesel Exhaust Warning
Diesel engine exhaust and some of it’s
constituents are known to the State of
California to cause cancer, birth defects or
other reproductive harm.
CALIFORNIA PROPOSITION 65
Battery Warning
Battery posts, terminals, and related accessories contain lead and lead
compounds, chemicals known to the State of California to cause cancer
and reproductive harm. Wash hands after handling!
Roll-Over Protective Structure
Your power unit is equipped with a Roll-Over Protective Structure (ROPS).
• Certifi ed seat belt anchor: #OSHA 1928.51.
• Certifi ed ROPS, roll bar: #OSHA 1928.52.
• Certifi ed ROPS, fold down roll bar: #OSHA 1928-51.
• Fold down ROPS must be fi xed in the upright position during operation.
• Always wear the seat belt during operation. Never jump from the power unit.
• During operation, the seat belt indicator light on the dash will turn on if the seat belt is not fastened.
The seat belt indicator light will turn off if the seat belt is fastened.
• If damaged, the roll bar or seat belt must be replaced before operation.
Alterations or modifi cations to this machine can
reduce safety and could cause damage to the
machine. Do not alter safety devices or operate
with shields or covers removed.
To Next Page
Loading...
Need help?
General
