66250980-EN - V1.0 - 06/02/14
12
CHANGE LOGIN DATA
If necessary you can change the access credentials (username
& password).
To change the access credentials, from the login page (Fig. 1)
rst enter the current user name and password then click on the
“Change login data” button.
On the “Changing user data” page complete the elds:
• New username: Enter the new user name
• New password: Enter the new password
• Conrm new password: enter the new password again.
After completing, click on the “Change login data” and wait to
be redirected to the login page. The new access credentials
must be used to enter.
NETWORK SETTINGS
Network settings (IP Address, Gateway, Subnet Mask and DNS) must be set according to the local area network (LAN).
This information will normally be available from the network administrator but may also be retrievable using a PC, smart phone or
tablet already connected to the network:-
This example uses Microsoft Windows 7 (Other versions of Windows may dier slightly):
• Open the “Control Panel” then double click on the “Network
and Sharing Center” icon;
• Click on “Local Area Connection” then click on the “Details”
Button
• The new window will show the network details, make a note
of the “IPv4 Address”, “IPv4 Subnet Mask”, “IPv4 DNS Server”
and “IPv4 Gateway”.
Fig. 6 Change login data
Fig. 7
Fig. 8
Art.4503 IP Video Speaker Unit Module
Web Server
To Next Page
Loading...
Need help?
General
