Viessmann Vitorond 100 User Manual

Burner - Beckett
29
Burner Installation (Beckett)
Instructions supplied
with Beckett burner
Observe all instructions supplied with
the burner.
Burner Information
Fuel
This boiler is for use with the Beckett
#2 fuel oil burner supplied by
Viessmann only. Use only the fuel
stated on the rating plate of the burner.
Oil nozzle
The Beckett burner for the VR1-63
boiler is shipped with factory setting
and oil nozzle installed. For VR1-50
boiler, replace installed nozzle with
nozzle packaged with burner.
For Beckett burner specifications see
table on page 59.
Burner calibration
Ensure that the combustion results of the
oil-fired burner mounted on this boiler are
verified after start-up.
If adjustments are necessary, always
verify results with a calibrated flue gas
analyzer.
For Beckett burner specifications see
table on page 59.
This burner is shipped with the oil pump
set to operate on a single line system.
To operate on a two-line system, the
bypass plug must be installed.
The burner is shipped configured for use
in single line applications. No changes
to the oil pump are required for use in
single line applications.
5671 044 v1.0
DO NOT USE GASOLINE
CRANKCASE DRAININGS OR ANY
OIL CONTAINING GASOLINE.
WARNING
IMPORTANT

Viessmann Vitorond 100 Specifications

General

Brand	Viessmann
Model	Vitorond 100
Category	Boiler
Language	English