Fig. 127 Rear Assist display.
¤Please first read and note the introductory information and heed the WARNINGS
In order to Operation
Automatically activate display: Shift into Reverse when the ignition is switched on or the
engine is running.
Manually deactivate display: Press a function selection button on the radio or the
navigation system ⇒ booklet
Radio
or ⇒booklet
Navigation
system
.
OR: Touch the O function button on the screen.
OR: Switch off the ignition. The Rear Assist display turns off
after a few seconds.
Switch off display by shifting out of
Reverse:
The camera display switches off.
Deactivate display by driving
forward:
Drive forward faster than about 10 mph (15 km/h).
Screen
Function buttons on the screen ⇒
fig. 127:
(1) Display or hide the menu bar.
(2) Turn off the rearview camera screen.
(3) Adjust display: brightness, contrast, color.
Special considerations
1) Do not use Rear Assist in the following situations:
– When an incorrect or unclear image is displayed, such as when there is poor visibility or the lens is
dirty.
– If the area behind the vehicle cannot be seen clearly or completely.
– If the rear of the vehicle is heavily loaded.
– When the rear hatch is open.
– If the driver is not familiar with the system.
– If the position or angle of the camera has changed, such as after a rear-end collision. Have the
system checked by an authorized Volkswagen dealer or an authorized Volkswagen Service Facility.
To Next Page
Loading...
Need help?
General
