Switches in the driver door
Key to
fig. 31:
(1) For the window in the driver door.
(2) For the window in the passenger door.
Opening or closing windows
Function Action
Opening: Press the switch.
Closing: Pull the switch.
Stopping automatic
movement:
Press/pull the respective switch again.
You can still use the power windows for several minutes after the ignition is switched off as long as the
driver or passenger door has not been opened. When the vehicle key has been removed from the
ignition and the driver door has been opened, the power windows cannot be opened or closed.
Power windows – features
¤Please first read and note the introductory information and heed the WARNINGS
Automatic lowering of the windows
Closed windows in the doors will go down slightly when the vehicle is unlocked, the door handle is
pulled, and after the vehicle key has been removed from the ignition ⇒
.
For vehicles with the single door unlocking function activated, only the window in the driver door
will go down slightly when the vehicle is unlocked from the outside. The window in the passenger door
will also go down slightly if the vehicle is unlocked a second time.
If no doors are opened, the windows will close again after several seconds. The windows will also
close if the door is closed or the vehicle is locked.
The windows can freeze to the seals at low outside temperatures and prevent the windows from going
down when the vehicle is unlocked or the door is opened. Do not open the door if the window does
not go down slightly ⇒
.
x Lock the vehicle again.
x Remove the ice with deicing spray.
x Unlock the vehicle and retry the function.
x If necessary, repeat until the windows are fully operational.
One-touch opening and closing
The one-touch feature automatically opens/closes a power window all the way. The window switch
does not have to be held down/up.
For one-touch opening: Press the switch for the window down briefly as far as it goes.
For one-touch closing: Pull the switch for the window up briefly as far as it goes.
Stopping automatic movement: Pull/press the switch again.
Reactivating the one-touch feature
If the vehicle battery is disconnected or dead and the windows are not completely closed, the one-
touch feature will not work and must be reactivated:
To Next Page
Loading...
Need help?
General
