Displa
Function
Coolant
temperature
Coolant temperature (digital display).
Speed warning
--- mph
When the set speed (from 20–155 mph or 30–250 km/h) is exceeded, an
acoustic warning sounds and a visual message may also appear in the
instrument cluster display.
Speed warning
--- km/h
Switching between the displays
x Vehicles without a multifunction steering wheel: Press the rocker switch
TRI P
in the windshield
wiper lever ⇒ fig. 16 (2).
x Vehicles with a multifunction steering wheel: Press the * or the + button ⇒ fig. 17.
Storing speed for the speed warning
x Select the Speed warning at -- mph or Speed warning at -- km/h display.
x Press the /+2%3%4 button on the windshield wiper lever or the
OK
button on the multi-function steering
wheel to save the current speed and to activate the warning.
x Or you can set a different speed within about 5 seconds with the
TRI P
rocker switch on the wind-
shield wiper lever or the * or + buttons on the multi-function steering wheel. Then press the /+2%3%4
button on the windshield wiper lever or the
OK
button on the multi-function steering wheel a second
time or just wait a few seconds. The speed is saved and the warning is activated.
x To deactivate, press the /+2%3%4 button on the windshield wiper lever or the
OK
button on the multi-
function steering wheel. The set speed is deleted.
Manually erasing trip memory 1 or 2
x Select the memory to be erased.
x Press and hold down the /+2%3%4 button in the windshield wiper lever or the
OK
button in the multi-
function steering wheel for about 2 seconds.
Enabling and disabling displays
Use the Settings menu, submenu MFI data to enable displays you want to be available under the
MFI menu in the instrument cluster display. The units in which data is displayed can also be changed,
Settings menu (Premium version).
Settings menu (Premium version)
¤Please first read and note the introductory information and heed the WARNINGS
Settings menu Function
Language
Set the language for messages in the display and navigation system.
MFI data
Select the features you want to have displayed in the MFI menu in the
instrument cluster display
Lights & Vision
Vehicle lighting settings
Time
Set hours and minutes for the instrument cluster clock and the Radio &
Navigation System clock. The time can be displayed in 12 or 24 hour
format, and can also be set to daylight savings time.