Fig. 159 Pulling the wheel cover off (Version 2).
¤Please first read and note the introductory information and heed the WARNINGS
Pulling off the wheel cover (Version 1)
x Take the lug wrench and wire clip out of the vehicle tool kit, Vehicle tool kit.
x Place the wire clip hook in one of the openings of the wheel cover.
x Slide the lug wrench through the clip ⇒
fig. 158 and pull the wheel cover off in the direction of the
arrow.
Pulling off the wheel cover (Version 2)
x Place the wire clip hook ⇒
fig. 159 in the opening of the wheel cover.
x Pull the wheel cover off in the direction of the arrow.
Installing the wheel cover (Version 1)
Make sure that the valve cutout is aligned with the tire valve, and press the wheel cover onto the
wheel rim. Make sure that the wheel cover is latched onto the rim along the entire circumference.
Installing the wheel cover (Version 2)
x Press the wheel cover onto the wheel rim. Make sure that the wheel cover is latched onto the rim
along the entire circumference.
To Next Page
Loading...
Need help?
General
