Unlocking or locking the vehicle with Keyless Access
Fig. 26 Ranges of the Keyless Access locking and starting system. Outside the vehicle: Unlocking range.
Inside the vehicle: Starting range.
Fig. 27 Keyless Access locking and starting system: Sensor for unlocking A on the inside of the front door
handles. Sensor for locking B on the outside of the door handles.
¤Please first read and note the introductory information and heed the WARNINGS
Keyless Access is a keyless starting and locking system that unlocks and locks the vehicle without
active use of a remote control vehicle key. All you have to do is touch a sensor surface on one of the
door handles ⇒
fig. 27 or push the Volkswagen emblem on the rear hatch, Rear hatch when a valid
remote control vehicle key is within range ⇒
.
General information
When a valid vehicle key comes within range ⇒
fig. 26, the Keyless Access locking and starting sys-
tem recognizes a valid vehicle entry request as soon as a door handle sensor is touched or the
Volkswagen emblem on the rear hatch is pressed. The following functions are then enabled without
active use of the remote control vehicle key:
x Keyless Entry: Unlocking the vehicle with the sensor surfaces on the door handles of the driver or
passenger door ⇒
fig. 27 (A) or by using the Volkswagen emblem on the rear hatch.
x Keyless Go: Start the engine and drive. For this, you just have to press the starter button and a
valid remote control vehicle key must be inside the vehicle.
x Keyless Exit: Locking the vehicle via the door handle sensor on the driver or passenger door
(B).
The power locks and the closing system work like the standard unlocking and locking system. Only the
way that the systems are operated is different.
To Next Page
Loading...
Need help?
General
