Elli Charger 11
EN
Charge with the wallbox
3. Charge with the wallbox
WARNING
Using a damaged wallbox or a damaged charging cable may expose the user to electric
components and result in the risk of electric shock, which may cause injury or death.
— Always check that the wallbox, the charging cable, and the charging plug
are free of damage before starting a charging session.
— Always check that the contact area of the charging plug
is free from dirt and moisture before starting a charging session.
— Make sure that the charging cable cannot become damaged
(kinked, jammed or driven over).
— Take precautions so that the charge plug does not come into contact
with heat sources, dirt or water.
3.1. Start and stop a charging session
1. Start charging.
— Plug the charging cable into your car.
— Optionally, hold your charge card (RFID card) in front of the reader
on the charging station to start charging.*
2. Your car is charging.
3. Stop charging.
— Optionally, hold your charge card (RFID card) in front of the reader
on the charging station to stop charging.*
— Unplug the charging cable from your car.
* For Elli Charger Connect and Elli Charger Pro only.
To Next Page
Loading...
Need help?
General
