Volkswagen Passat User Manual

40-2
Sub-frame, stabilizer bar
and control arm (Base
suspension)
Note:
If a vehicle has to be
moved after removing the
drive shaft, first install outer
joint and tighten to 50 Nm
(37 ft lb) otherwise the
wheel bearing will be
damaged.
Specifications for wheel
alignment Page 44-2 .
Welding and straightening
operations are not
permitted on load bearing
suspension components or
those components which
locate the wheels.
Always replace self-locking
nuts.
Always replace corroded
nuts/bolts.
Page
2
of
82
Front Wheel Suspension, Shafts and Axle
12/7/2004
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.40.1

Volkswagen Passat Specifications

General

Brand	Volkswagen
Model	Passat
Category	Automobile
Language	English