44-4
Vehicle alignment specifications (four wheel drive vehicles)
Front axle
Suspension strut axle
Engine 85 kW (115 hp) 128 kW (172
hp)
Version Base
suspension
Plus
suspension
Total toe
1)
(not pressed)
0 10' 0 10'
Camber
2)
(in straight- ahead position) Maximum permissible
difference between sides
-1 20' 20'
max. 30'
-1 10' 20'
max. 20'
Toe angle difference at 20left and right lock -1 10' 30' -1 40' 30'
Caster (not adjustable) Maximum permissible difference between
sides
+1 40' 30'
max. 30'
+3 20' 30'
max. 30'
1)
Only adjust total toe on right toe rod
2)
Camber corrections can only be made at the wheel bearing housing/suspension strut connection.
Camber adjustment Page 44-6 .
Note:
After adjusting steering geometry check position of steering wheel; correct if necessary.
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.44.1
To Next Page
Loading...
Need help?
General
