Volkswagen Passat User Manual

40-43
Drive shaft, removing and installing
(Plus running gear)
Removing
- Loosen 12-point nut with vehicle standing on its
wheels.
- Disconnect drive shaft from transmission drive
flange.
- Remove bolts (arrow -A-).
- Loosen bolt (arrow -B-).
- Separate connection between ball joint/control
arm. (First mark installation position).
Note:
When pressing drive shaft out ensure sufficient
clearance is available.
- Press drive shaft out. Install tool as shown in
illustration.
Page
43
of
82
Front Wheel Suspension, Shafts and Axle
12/7/2004
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.40.1

Volkswagen Passat Specifications

General

Brand	Volkswagen
Model	Passat
Category	Automobile
Language	English