Volkswagen Passat User Manual

48-67
For easier installation of the puller, it is recommended
that a rubber band be placed around the jaws.
Illustration shows the housing in cross section for
better view.
Inner sealing ring for toothed rod, removing
1 - Puller, e.g. Kukko 21/4
2 - Rubber band
3 - Roller bearing
4 - Housing
- Remove sealing ring for toothed rod from the
housing
- Disconnect hose line from valve body housing to
cylinder line
- Clean hose line, housing. Check threaded
connection for contamination (rubber residue,
chips)
Page
67
of
99
Steering
12/7/2004
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.48.1

Volkswagen Passat Specifications

General

Brand	Volkswagen
Model	Passat
Category	Automobile
Language	English