45-3
Thoroughly clean all unions and the adjacent
areas before loosening, do not use aggressive
cleaning agents such as brake cleaner, petrol,
thinners or similar.
Place removed parts on a clean surface and
cover.
Do not use fluffy cloth.
Carefully cover or seal open components if
repairs cannot be carried out immediately.
Only remove replacement parts from packaging
immediately prior to installation.
Only use genuine packed parts.
When the system is open do not work with
compressed air and do not move the vehicle.
Make sure that no brake fluid enters harness
connectors.
During painting operations, the electronic
control module can be exposed to a max.
temperature of 95C (203F) for only a short
period, and to a maximum of 85C (185F) for
longer periods (approx. 2 hours).
locking Brake System (ABS) and Anti
locking Brake System with Electronic Differential Lock (A
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.45.1
To Next Page
Loading...
Need help?
General
