Volkswagen Passat User Manual

47-21
Note:
- Thread piston into housing by turning knurled
wheel clockwise.
Install special tool 3272 so that the collar (arrow)
of the tool is seated against the brake carrier.
If piston is difficult to move, use a 13 mm open
end wrench on flats (arrow A) provided for this
purpose.
If the piston is pushed back with a piston resetting
tool or by operating the foot brake the automatic
adjustment in the brake caliper is destroyed.
- Install brake pads.
Page
7
of
8
Rear brake caliper, servicing
12/7/2004
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.47.4

Volkswagen Passat Specifications

General

Brand	Volkswagen
Model	Passat
Category	Automobile
Language	English