15
Ringer volume
Use this feature to set the ringer volume to one of six levels or turn the ringer off.
When the ringer is off, the icon appears on the deskset screen. The UP406
deskset stores the volume setting for all lines.
1. When the deskset is idle, press MENU/SELECT.
2. Press MENU/SELECT again or /SKIP to select
Ringers.
3. Press MENU/SELECT again or press /SKIP to select
Ringer Volume.
4. Press , , /REPEAT, /SKIP, or /VOLUME/
on the deskset to adjust the ringer volume.
5. Press MENU/SELECT to save the setting and return to
the previous menu. To exit without making changes,
press CANCEL.
-OR-
When the deskset is idle, press /VOLUME/ to adjust
the ringer volume, then press MENU/SELECT to save.
NOTE: The ringer volume also determines the ringer volume for intercom calls. If
the deskset ringer volume is set to off, it is silenced for all incoming calls, including
intercom calls.
Set date/time
The answering system displays the date and time of the message while playing
messages. Before using the answering system, set the date and time as
follows.
Follow the steps below to set the month, day, year
and time:
1. When the deskset is idle, press MENU/SELECT.
2. Press or to scroll to Set Date/Time, then press
MENU/SELECT or /SKIP.
3. Use the dialing keys to enter the month (MM), day (DD)
and year (YY). Press /REPEAT or /SKIP to scroll
between month, day and year.
4. Press MENU/SELECT to move to the time setting.
5. Use the dialing keys to enter the hour and minute.
6. Press /REPEAT or /SKIP to select AM or PM.
7. Press MENU/SELECT to save the setting and return to the
previous menu. To exit without making changes, press
CANCEL.
Telephone settings
Telephone setup
>Ringers
Set Date/Time
One Touch
Phone Settings
Ringers
>Ringer Volume
Ringer Tone
Volume
Ringers
>Set Date/Time
One Touch
Phone Settings
Set Date
01/01/14
MM/DD/YY
Set Time
12:00 AM
To Next Page
Loading...
Need help?
General
