23
This deskset has 32 one- and two-touch memory locations (speed dial
locations) where you can store the phone numbers or system extension
numbers you wish to dial using fewer keys than usual. You can store up to 30
digits in each location.
You can access the first 16 locations using only the one-touch buttons. To
access the remaining 16 locations, press LOWER and then the one-touch
button for the desired location. You might wish to write the names, telephone
numbers, or extension numbers of the one-touch entries on the directory card,
using the light gray spaces for the upper 16 locations and the white spaces for
the lower 16 locations.
Assign a one-touch entry
Use the following steps to program the one-touch keys.
1. When the deskset is idle, press MENU/SELECT.
2. Press or to scroll to One Touch, then press
MENU/SELECT or /SKIP.
3. Press or to scroll to Program, then press
MENU/SELECT or /SKIP.
4. The screen displays Enter Number:
5. Use the dialing keys to enter a deskset number
(up to 30 digits) or an extension number.
• Press DELETE to delete a digit.
• Press /REPEAT or /SKIP to move the cursor to
the left or right.
• You can include a pause while storing a dialing
sequence that requires one during actual dialing.
Press or to choose Add pause, then press MENU/
SELECT. A P appears on the screen.
• Store a signal for switching to temporary tone signaling. If you have dial
pause (rotary) service, this signal is required for some special services.
Press or to choose Send tone, then press MENU/SELECT. A T appears
on the screen. All numbers you enter after this will send touch-tone signals
during dialing.
• You can store the flash signal required by some special services as part of a
dialing sequence. Press or to choose Add flash, then press
MENU/SELECT. A F appears on the screen. Continue storing the number
as usual.
Telephone operation
One touch
Ringers
Set Date/Time
>One Touch
Phone Settings
One Touch
View
>Program
Enter Number:
18005959511_
Select to:
Done
To Next Page
Loading...
Need help?
General
