VTech IS 8121-3 User Manual

49
intentionally block their names and/or
telephone numbers. You can only view
a maximum of 15 digits of every caller
ID log entry.
NOTE
• You can use this product with regular
caller ID service, or you can use this
product’s other features without
subscribing to caller ID or combined
caller ID with call waiting service.
How the caller ID log works
The telephone stores caller ID
information about the last 50 incoming
calls in the telephone base. Entries are
stored in reverse chronological order.
The phone deletes the oldest entry
when the log is full to make room for
new calls. This information is common
to the telephone base and all handsets,
so changes made using any handset
or the telephone base are reflected in
all other devices. If you answer a call
before the information appears on the
screen, it does not show in the caller ID
log.
NOTE
• Each entry may have up to 24 digits for
the phone number and 15 characters
for the name.
Save a caller ID log entry to the
phonebook
1. While reviewing the caller ID log,
press q CID or p to browse
through the caller ID log.
2. When the desired entry displays,
press MENU/SELECT.
3. Press MENU/SELECT again to choose
To Phonebook.
4. When the screen shows Enter
number, use the dialing keys to
modify the telephone number (up
to 30 digits).
• Press q CID or p to move the
cursor to the left or right.
• Press and hold REDIAL/PAUSE to
enter a 3-second dialing pause (a
P appears).
• Press MUTE/DELETE to erase a
digit.
• Press and hold MUTE/DELETE to
erase all digits.
5. Press MENU/SELECT to save the
number in the display.
• The screen shows Enter name.
6. Use the dialing keys to modify the
name (up to 15 characters).
• Press 0 to add a space.
• Press q CID or p to move the
cursor to the left or right.
• Press MUTE/DELETE on the
handset to erase a character.
• Press and hold MUTE/DELETE
on the handset to erase all
characters.

VTech IS 8121-3 Specifications

General

Brand	VTech
Model	IS 8121-3
Category	Telephone
Language	English