VTech IS 8121-3 User Manual

81
Voice guide to set Smart call
blocker
This feature is an easy and alternative way
for you to do the basic setup of Smart
call blocker. You can follow the voice
guide to set your telephone system to
allow or to screen all incoming home
calls, or to screen home calls that do not
display a phone number.
1. Press MENU/SELECT to enter the
main menu when the handset is not
in use.
2. Press q CID or p to
scroll to Smart call blk. Press
MENU/SELECT.
3. Press q CID or p to scroll
to Voice guide, then press
MENU/SELECT.
4. You hear a voice prompt “Hello! This
voice guide will assist you with the
basic setup of Smart call blocker...”
5. Set up your Smart call blocker
feature by inputting the designated
numbers, as instructed in the voice
guide.
• Press 1 if you want to screen home
calls with telephone numbers that
are not saved in your directory,
allow list or star name list; or
• Press 2 if you do not want to
screen calls, and want to allow all
incoming calls to get through.
NOTES
• The screening feature of Smart call
blocker is applicable to home calls
only. All incoming cell calls will get
through and ring. If you want to
block a cell call, add the number to
the block list. See Block list.
• You can press OFF/CANCEL on the
handset to quit the voice guide at
any time.
• After a power outage, the telephone
prompts you to set the date and time.
After the date and time setting is
done or skipped, the telephone will
prompt if you want to set up Smart
call blocker via voice guide. Press
MENU/SELECT to start the setup.

VTech IS 8121-3 Specifications

General

Brand	VTech
Model	IS 8121-3
Category	Telephone
Language	English