VTech IS 8121-3 User Manual

19
NOTES
• Place the handset in the charger will
bypass the set date and time, and
voice guide.
• For best performance, keep the
handset in the charger when not in
use.
• The battery is fully charged after 12
hours of continuous charging.
• If you place the handset in the charger
without plugging in the battery, the
screen displays NO BATTERY.
Check the battery level
After you have installed the battery,
check the battery level on the handset
screen.
• If the battery icon is , or , then
go to Set the date and time and Set
the answering system through voice
guide.
• If the screen is blank, or flashes, then
the battery needs to be charged. Go
to Charge the battery before you do
any setting or operation.
Check for dial tone
Press HOME/FLASH. If you can hear
a dial tone, the installation is successful.
If you do not hear a dial tone
• Make sure the installation procedures
described above are properly done.
• It may be a wiring problem. If you
have changed your telephone
service to digital service from a cable
company or a VoIP service provider,
the telephone line may need to
be rewired to allow all existing
telephone jacks to work. Contact
your cable/VoIP service provider for
more information.

VTech IS 8121-3 Specifications

General

Brand	VTech
Model	IS 8121-3
Category	Telephone
Language	English