VTech IS8151-3 User Manual

24
Delete a redial list entry
1. Press REDIAL/PAUSE on the handset or telephone base in
idle mode.
2. Press q CID or p on the handset or telephone base.
-OR-
Press REDIAL/PAUSE repeatedly to browse until the desired
number displays.
3. Press MUTE/DELETE on the handset or DELETE on the
telephone base to delete the displayed number. You hear
a confirmation tone.
Sound settings
Key tone
You can turn the key tone on or off.
1. Press MENU in idle mode to enter the main menu.
2. Press q CID or p on the handset or telephone base to
scroll to Settings, then press SELECT.
3. Press q CID or p on the handset or telephone base to
scroll to Key tone, then press SELECT.
4. Press q CID or p on the handset or telephone base to
select the desired volume or Off.
5. Press SET to save your preference. There is a confirmation
tone and the screen returns to the previous menu.
Ringer tone
You can select the ringer tones for incoming home and cell
calls.
To select a ringer tone:
1. Press MENU on the handset or telephone base in idle
mode to enter the main menu.
2. Press q CID or p on the handset or telephone base to
scroll to Ringers, then press SELECT.
3. Press q CID or p on the handset or telephone base to
scroll to Ringer tone, then press SELECT.
4. Press q CID or p on the handset or telephone base
to highlight All lines, Home, Cell 1 or Cell 2, then press
SELECT .
5. Press q CID or p on the handset or telephone base
to sample each ringer tone. A sample of each ringer tone
plays as you scroll through the choices.
6. Press SELECT to select and save your choice. You hear a
confirmation tone.
N OTE
• If you turn off the ringer volume, you will not hear ringer tone
samples.
Ringer volume
You can set the ringer volume for incoming calls on all lines. A
ringer off icon shows when the volume is set to off.
1. Press MENU on the handset or telephone base in idle
mode to enter the main menu.
2. Press q CID or p on the handset or telephone base to
scroll to Ringers, then press SELECT.
3. Press SELECT again to select Ringer volume.
4. Press q CID or p on the handset or telephone base to
sample each volume level.
5. Press SET to save your preference. There is a confirmation
tone and the screen returns to the previous menu.
-OR-
1. Press + VOL - on the telephone base to set the ringer
volume of the telephone base while it is in idle mode.
2. Press SET to confirm and you hear a confirmation tone.

VTech IS8151-3 Specifications

General

Brand	VTech
Model	IS8151-3
Category	IP Phone
Language	English