30
Answer a PTT call
You can respond to a PTT call, as described below.
Using a cordless handset or the telephone base:
1. When your device receives a PTT call, it beeps and shows
Press and hold [PTT] to talk.
2. When the other party is speaking, your speakerphone light
is on, and your device shows:
• PTT From HANDSET X To devices: X (the first X
represents the initiating handset number, and the
second X represents your handset number; a maximum
of four handset numbers appear).
-OR-
• PTT From BASE 0 To devices: X (the X represents your
handset number; a maximum of four handset numbers
appear).
3. When your speakerphone light is off (the screen shows
Press and hold [PTT] to talk), press and hold PUSH TO TALK
on your handset or FLASH/PTT on your telephone base.
You will hear a chirp. Speak towards the device.
• While you are speaking, your device shows PTT
To BASE 0 or PTT To HANDSET X (X represents the
destination handset number), or PTT To devices: X
(X represents the handset numbers of one or more
destination handsets; a maximum of four handset
numbers appear).
• Your voice is broadcast to all destination devices.
After speaking, release PUSH TO TALK on your handset or
FLASH/PTT on your telephone base. Your device will beep.
After the beep, if your speakerphone light is off, you can
press and hold PUSH TO TALK on your handset or
FLASH/PTT on your telephone base to continue speaking,
or the destination device can respond.
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT session to an intercom call.
Using a cordless handset or the telephone base:
1. When your device shows Press and hold [PTT] to talk, press
INTCOM. The screen shows Switch to Intercom?.
2. Press SELECT. Your device displays Calling BASE 0 or
Calling HANDSET X. The destination device briefly shows
Push to talk Ended and then HANDSET X is calling or BASE
0 is calling. The destination device rings.
3. Press
HOME/FLASH or any dialing keys (0-9, or
TONE ) on the destination handset, or press HOME or
any dialing keys (0-9, or TONE ) on the telephone base to
answer the intercom call. Both devices now show Intercom.
4. To end the intercom call, press OFF/CANCEL on your
handset or place the handset in the telephone base or
charger, or press END on the handset or telephone base.
Both screens show Intercom ended.
Answer an incoming call during a PTT call
When you receive an outside call during PTT, there is an alert
tone.
Using a cordless handset or the telephone base:
• During a one-to-one PTT call, press
HOME/FLASH,
CELL 1 or CELL 2 on the initiating or destination handset, or
press HOME, CELL 1 or CELL 2 on the telephone base. The
PTT call ends automatically and the outside call is answered.
• During a one-to-group PTT call, press
HOME/FLASH,
CELL 1 or CELL 2 on the initiating handset, or press HOME,
CELL 1 or CELL 2 on the telephone base. The PTT call ends
automatically and the outside call is answered.
• During a one-to-group PTT call, press
HOME/FLASH,
CELL 1 or CELL 2 on any one of the destination handsets, or
press HOME, CELL 1 or CELL 2 on the telephone base. That
device answers the outside call. The PTT call continues for
the rest of the PTT participants.
• To leave the PTT call without answering the incoming call,
press OFF/CANCEL on your handset or CANCEL on your
telephone base. The telephone continues to ring.
Make an outgoing call during a PTT call
Using a cordless handset or the telephone base:
• During a one-to-one PTT call, press
HOME/FLASH on
your handset or press HOME on the telephone base to get a
dial tone. The PTT call ends automatically.
• During a one-to-group PTT call, press
HOME/FLASH on
the initiating handset or press HOME on the telephone base.
The PTT call ends automatically and you get a dial tone.
• During a one-to-group PTT call, press
HOME/FLASH on
any one of the destination handsets or press HOME on the
telephone base. That device gets a dial tone. The PTT call
continues for the rest of the PTT participants.
End or leave a PTT call
Using a cordless handset or the telephone base:
For one-to-one PTT calls, both initiating and destination
devices can end the PTT call. For PTT calls to multiple devices,
the initiating device can end the PTT call. If any one of the
destination devices leaves the PTT call, the call continues until
all participants or the initiator hangs up.
Press OFF/CANCEL or END on the handset, or press CANCEL
or END on the telephone base. The screen shows Push to talk
Ended.
-OR-
Place the handset in the telephone base or charger, then the
handset returns to idle mode.
N OTE
• After PUSH TO TALK on the handset or FLASH/PTT on the
telephone base is released, the PTT call remains open for a short
time. If no one presses PUSH TO TALK on the handset or
FLASH/PTT on the telephone base within 10 seconds, the PTT call
ends automatically.
To Next Page
Loading...
Need help?
General
