Wacker Neuson DS70 User Manual

9 Use and operation
100_0201_op_0005.fm 21
9 Use and operation
9.1 Tests prior to start-up
 Check the machine and components for damage. If there is visible damage, do not use the machine
and contact a Wacker Neuson dealer immediately.
 Check control elements for serviceability.
 Ensure that loose packing material has been removed from the machine.
 Follow current local authority regulations on noise emissions.
 Check fuel level.
 Check oil level.
 Check screw joints for firm seating.
 Check air intake area for dirt.
9.2 Operating notes
 The proper place for the operator is behind the machine.
 Guide and steer the machine at the guide clip.
 While working, exploit the machine's own weight.
WARNING
Incorrect handling can lead to injury or serious damage to property.
 Read and follow all the safety notes in these operating instructions.
NOTE
Carry out the checks in accordance with the Maintenance section; if need be, top-up low
fuel and lubricant levels; see Technical Data section.
WARNING
Risk of tipping
Serious risk of injury through machine sliding or tipping.
 Always secure the machine against tipping.
 Set the machine down on a level surface with a firm base.
WARNING
Risk of crushing
Crushing of hands and feet possible.
 Work carefully.
CAUTION
Take precautions against injuries caused by vibration.
Increased hand and arm vibration.
 Do not overload the machine.
 Take a break at regular intervals.
CAUTION
Injuries or damage to property
Severe recoiling can occur on solid, hard, or unyielding ground.
 Avoid these soils.

Wacker Neuson DS70 Specifications

General

Brand	Wacker Neuson
Model	DS70
Category	Vibratory rammers & tampers
Language	English