EHB 11 Maintenance
37
8 Maintenance
8.1 Maintenance schedule
WARNING
Improper handling can result in injury or serious material damage.
f Read and follow all safety instructions of this operator's manual, see chapter
Safety information.
Task Daily be-
fore oper-
ation
Every
20 hrs.
Monthly
Check power cable for perfect
condition – if power cable is
defective, have it replaced. *
* Have the machine repaired by your WACKER representative.
Visual inspection of all parts
for damage.
Clean the machine.
Check shanks and cutting
edges of tool – sharpen, re-
forge or replace as needed.
Lubricate crank mechanism.
Check tool holder for wear –
have it changed, if
necessary. *
To Next Page
Loading...
Need help?
General
