9
EPG-SPRINT.
OPERATING MANUAL
VERSION 08/2010 ORDER NUMBER DOC 2305222
2.5 SAFETY FEATURES
Plates bearing information for the user have been attached to the work openings of the
powder coating booth.
The plate size corresponds to the standard category Ø 100 mm; 3.94 inches.
The label plates, which must be attached, are shown below.
High-voltage!
In the control cabinet:
(25 mm; 0.98 inches)
Voltage before main
switch.
Forbidden for unauthorized
persons!
Explosive atmosphere!
Forbidden for persons
with a cardiac pacemaker!
Follow the instructions in
the operating manual!
Fire, open light and
smoking prohibited!
Wear electrostatically
conductive footwear!
Danger of crushing!
Risk of tripping!
Do not jump on the
booth fl oor!
Danger of slipping
To Next Page
Loading...
Need help?
General
