Frequently asked questions
• What Kind of Paint Can I Use?
– The Wagner Power Painters are designed to spray a wide variety of
materials. All of the Power Painters will spray semi-transparent stains,
clear sealers, oil paints, many acrylic paints and other thin-bodied
materials. Units with higher PSI ratings will do a better job spraying
many of the thicker, 100% acrylic paints. As a general rule, only the
thickest acrylic paints require thinning. Always start without thinning.
• What Are The Differences Between Models?
– The models differ on both ability to spray certain materials and the
features included. Refer to the selection chart of this presentation for
direct comparisons of each model.
• Is It Hard To Control The Spray Pattern?
– One of the biggest concerns most people have is whether there will be a
lot of overspray. Since the Power Painters are airless, “bounce back” or
overspray is minimized. You will find that by masking off areas or
utilizing a spray shield to protect areas you don’t want painted will work to
achieve professional results and save time when compared to painting
with a brush.
To Next Page
Loading...
Need help?
General
