Handy Hints
Clean the spray gun after every use. Proper cleaning and maintenance
ensures the sprayer will continue to operate correctly every time.
When the job is finished empty any unused paint from the container and clean it
with the appropriate thinner. For water based paints warm soapy water is best.
Fill the container with appropriate thinner and spray through the gun for 20
seconds.
• Disconnect the sprayer for the power supply.
• Remove the paint container and pull out the suction tube.
• Unscrew the spray tip with guard and remove the swirl valve.
• Unscrew the locking nut and pull the complete pump housing forward until it is
free of the drive housing. Remove the piston and spring from the housing
and separate them. Clean all parts thoroughly with the appropriate thinner.
Never immerse electrical parts of the sprayer in water or any other liquid.
To Next Page
Loading...
Need help?
General
