Frequently asked questions – cont.
• How Do I Spray with a Power Painter?
– We recommend that you practice on a piece of scrap wood or cardboard.
The key to a good job is an even coating over the entire surface. This is
done by using even strokes at a constant speed keeping the gun at right
angles to the surface and at a distance of 25 to 30 cm. Move your entire
arm back and forth rather than flexing your wrist.
• What Are The Electronic Settings (Speeds)?
– Models with electronic speed control have the ability to change the motor
speed and vary the width for the spray pattern. The slower the speed the
narrower the spray pattern providing you with the ability to move in real
close for cut-in work around windows and doors. The faster the speed
the larger the pattern for large surfaces.
• Are The Power Painters Easy To Clean?
– YES! It will only take about the same amount of time it takes to
thoroughly clean a brush and think about how much time you will save by
painting with a Power Painter. No tools are required for cleaning. All
parts fit together by hand. Refer to the cleaning portion of this
presentation.
To Next Page
Loading...
Need help?
General
