Cleaner Lubricant
Wagner’s cleaner lubricant is recommended for use when changing colors of
paint, overnight cleaning and long term storage.
For Cleaning when changing paint colors or storing overnight:
Empty paint container and clean thoroughly with warm soapy water. Fill container
with 1 litre of clear warm water. Add 30ml of cleaner lubricant to water. Mix
thoroughly. If changing colors, spray about half through the sprayer. Spray into
open space to avoid mixture bouncing back. To resume painting, briefly spray
paint on newspaper or scrap material to clear cleaner lubricant from sprayer. If
storing overnight, spray one half through sprayer and store. Save remainder for
later use.
For long term cleaning and storage:
Disassemble according to instructions in owner’s manual. Mix as described in
step before . Dip brush in mixture and use to clean parts. To clean inside pump
housing, push brush completely through cylinder opening. If paint does not come
off easily, put parts in a separate container, add cleaner lubricant and let soak.
Reassemble sprayer. To lubricate, spray cleaner lubricant through sprayer. If
parts have been soaked, remix a new supply. Do not spray water through the
sprayer after spraying cleaner lubricant through it. Further lubrication is not
necessary. Wipe off any excess moisture from the sprayer and store.
To Next Page
Loading...
Need help?
General
